HPE0-S57 Dumps PDF - HPE0-S57 Real Exam Questions Answers
Get Started: HPE0-S57 Exam [2022] Dumps HP PDF Questions
Introduction to Designing HPE Hybrid IT Solutions HPE0-S57 Exam
This exam validates the Candidate's ability to describe, differentiate, and apply industry-standard, foundational SMB architectures, and technologies, recommend and position HPE SMB products, solutions, and appropriate services for customer use cases. It also tests to evaluate the customer environment, and plan and design solutions using the HPE SMB portfolio to meet customer business requirements. It also validates, installs, configure, and upgrade HPE SMB solutions and their components, troubleshoots and repair HPE SMB solution components, manages, monitor, administer, and operate HPE SMB solutions and their components.
NEW QUESTION 72
You just finished building a complete solution for a customer in One Config Advanced (OCA). You present it to the customer. The customer requires special packaging for the solution Click in the exhibit of OCA where you can add special packaging instructions for the complete solution.
Answer:
Explanation:
NEW QUESTION 73
A customer needs a VMware Horizon VDI solution with accelerated GPU support. They need the highest density GPU solution available.
Which solution should you recommend?
- A. HPE DL360 Gen10 with primary GPU riser
- B. HPE Apollo r2600 with RCM Module
- C. HPE WS460c Gen9 Graphics Server Blade with graphics expansion
- D. HPE Synergy SY 480 with multi-MXM expansion module
Answer: D
NEW QUESTION 74
You are offering a startup service of StoreOnce 3620 to a customer.
Which customer need will require an additional Pointnext service?
- A. installation of HPE StoreOnce Recovery Manager Central software
- B. validation of the StoreOnce System operation
- C. installation of hardware to the rack
- D. creation of the installation plan
Answer: B
NEW QUESTION 75
A customer asks you about the features of the HPE SimpliVity, such as performance, availability, efficiency, and protection.
Which statement is correct about an HPE SimpliVity solution that enables these features?
- A. The OmniStack Virtual Controller(OVC) creates an iSCSI datastore where the hypervisor stores the workload VMs.
- B. The OmniStack Accelerator Card (OAC) connects directly to the iSCSI VIP address enabled by the OVC.
- C. The OmniStack Accelerator Card (OAC) has direct hardware access to the two PCIe cards through VM direct path IO.
- D. The OmniStack Accelerator Card (OAC) contains a FPGA programmed with HPE SimpliVity deduplication, compression, and optimization algorithms.
Answer: D
Explanation:
Explanation
Explanation/Reference: https://h20195.www2.hpe.com/v2/getpdf.aspx/a00009003enw.pdf (6)
NEW QUESTION 76
A customer requires an integrated compute, multi-terabyte storage, and networking solution that will enable them to rapidly provision their mixed portfolio of applications.
Which HPE platform should you recommend?
- A. HPE Synergy
- B. HPE ProLiant DL
- C. HPE Superdome Flex
- D. HPE Edgeline
Answer: C
Explanation:
Easy access to new, disruptive HPC technology with support for standard HPE provisioning, cluster management and performance software Reference: http://193.62.125.70/CIUK2017/HP.PDF
NEW QUESTION 77
You propose a Nimble HF40 solution with 4x 10GbaseT ports to a customer The raw capacity Is 500 TIB The customers growth expectations have changed, and they now request the solution to support 1000 TiB of raw storage instead.
Match the possible update to the solution with the description.
Answer:
Explanation:
NEW QUESTION 78
Which HPE solution uses Integrated Lights Out (iLO) and Integrated Systems Manager (iSM) for an optimal infrastructure management experience?
- A. HPE Synergy 12000 Frame
- B. HPE Edgeline 4000
- C. HPE SimpliVity 2600
- D. HPE Apollo 8000 series
Answer: B
Explanation:
Explanation/Reference: https://assets.ext.hpe.com/is/content/hpedam/documents/a00050000-0999/a00050138/ a00050138enw.pdf
NEW QUESTION 79
A customer is placing a large order of HPE ProLiant DL380 servers with custom factory integration. Which type of SKU should you use for this order?
- A. BTO
- B. LTO
- C. TCO
- D. CTO
Answer: D
NEW QUESTION 80
During Synergy solution on boarding, the customer asks about a firmware overview of all the compute modules at once. Click where you can access the information.
Answer:
Explanation:
NEW QUESTION 81
A customer needs to manage the power of their Apollo servers. The server racks provide only basic PDU capability.
Which Management tool will meet the customer's need?
- A. HPE Apollo Platform Manager
- B. HPE Insight Cluster Management Utility
- C. HPE OneView
- D. HPE Power Advisor
Answer: A
NEW QUESTION 82
Which security features does HPE ProLiant provide? (Select two )
- A. Intrusion Detection
- B. TPMOption
- C. D HTTP Boot
- D. PXE Boot
- E. Intruder Lockout
Answer: D,E
NEW QUESTION 83
A customer is considering a hyperconverged solution to consolidate their current virtualization environment.
Which question should you ask to determine whether SimpliVity is the correct platform?
- A. Are you booting hypervisors over PXE?
- B. What is the storage protocol you currently use to access local drives?
- C. Which SAN switches are in your current environment?
- D. How many VMs do you currently run?
Answer: D
NEW QUESTION 84
You are offering a startup service of StoreOnce 3620 to a customer
Which customer need would require an additional Pointnext service?
- A. installation of hardware to the rack
- B. integration of StoreOnce and a backup ISV application
- C. setup and demonstration of the configuration to one host
- D. creation of the Installation plan
Answer: C
NEW QUESTION 85
Match the appropriate server, storage, or networking platform to the workload. (Choose all that apply.)
Answer:
Explanation:
Explanation
simplivityML/DLSynergyApollo
NEW QUESTION 86
You are validating a solution that has customer requirements for both Ethernet and Fibre Channel connectivity.
Match the cables and adapters to the supported technology.
Answer:
Explanation:
NEW QUESTION 87
In preparation for a customer offer, you need an easy-to-use, web-based resource that can create the presentation quickly and easily, using HPE standard, global, online platform tools.
What should you use?
- A. HPE Proposal Web
- B. HPE One Configuration Advanced
- C. HPE Synergy Planning Tool
- D. HPE Power Advisor
Answer: B
Explanation:
Explanation/Reference: https://h22246.www2.hpe.com/oca/OCAExternalLogin
NEW QUESTION 88
During Synergy solution on boarding, the customer asks about a firmware overview of all the compute modules at once. Click where you can access the information.
Answer:
Explanation:
NEW QUESTION 89
Refer to the Exhibit:
You are presenting an HPE SimpliVity solution to a customer. When looking at the hardware details, the customer asks about the connectivity options at the back of the HPE SimpliVity node Which answer should you give about the port highlighted in the exhibit?
- A. This port is the iLO port and should be connected to the management network
- B. This port is used for the Federation traffic between the HPE SimpliVity nodes.
- C. This port is used for the Storage network and should be connected to the dedicated storage network switches
- D. This port is used for diagnostics and should not be used for daily operations
Answer: C
NEW QUESTION 90
A customer is considering a refresh of their ToR switches because they need 25 GbE connectivity.
Which switch should you recommend?
- A. FlexFabric 5710
- B. FlexFabric 5980
- C. FlexFabric 5945
- D. FlexFabric 5940
Answer: C
Explanation:
Explanation/Reference:
Explaining:
High-density 100GbE/40GbE/25GbE/10GbE spine/top-of-rack (ToR) connectivity Reference: https://h20195.www2.hpe.com/v2/getmobile.aspx?docname=a00049249enw
NEW QUESTION 91
During Synergy solution on boarding, the customer asks about a firmware overview of all the compute modules at once. Click where you can access the information.
Answer:
Explanation:
NEW QUESTION 92
Which HPE tool combines performance metrics from multiple arrays?
- A. SAF Analyze
- B. SAF Collect
- C. NinjaStars
- D. NinjaCrawler
Answer: B
NEW QUESTION 93
Match the appropriate server, storage, or networking platform to the workload. (Choose all that apply.)
Answer:
Explanation:
NEW QUESTION 94
You have been asked to architect an HPE 3PAR storage solution and integrate it into a customers existing mufti-vendor SAN Which tools should you consult to verity interoperability of your proposed solution? (Select two)
- A. HPE Single Point of Connectivity Knowledge
- B. HPE SAN Design Guide
- C. HPE InfoSlght
- D. HPE lanamark
- E. HPE Product Bulletin
Answer: B,E
NEW QUESTION 95
Based on assessment and placement evaluations results, match the product to its levels of reliability, functionality, cost, or availability. (Choose all that apply.)
Answer:
Explanation:
NEW QUESTION 96
A customer needs to provide a composable server solution that is optimized for both the highest CPU frequency and the highest memory density.
Which compute solution is recommended?
- A. Synergy SY 660 Gen10
- B. Synergy SY 620 Gen9
- C. Synergy SY 660 Gen9
- D. Synergy SY 480 Gen10
Answer: A
NEW QUESTION 97
......
Salary of Designing HPE Hybrid IT Solutions HPE0-S57 Certified Professional
HPE professionals are in great demand nowadays. The salary of HPE0-S57 exam test certified professional in:
- India: 7,63,709 INR
- England: 83,255 Pound
- Europe: 98,725 Euro
- United States: 108,849 USD
The cost of Designing HPE Hybrid IT Solutions HPE0-S57 Exam
The price of Designing HPE Hybrid IT Solutions HPE0-S57 exam is $300 USD. for more information please visit HPE Official Website
HPE0-S57 Premium Exam Engine pdf Download: https://pass4sure.examtorrent.com/HPE0-S57-prep4sure-dumps.html
