Latest [Feb 02, 2022] 100% Passing Guarantee - Brilliant JN0-250 Exam Questions PDF
JN0-250 Certification – Valid Exam Dumps Questions Study Guide! (Updated 66 Questions)
Why chose the Juniper JN0-250 exam dumps of the ExamTorrent for the preparation?
Nor any other exam dumps, in the world, have the same quality of the Certification questions or the answers. Our exam dumps are carefully prepared by the best experts in the industry. We keep our exam dumps regularly updated and improved. You can download the Juniper JN0-250 exam dumps anytime, anywhere. Just visit our website or our mobile app and get your exam dumps. Moreover, you can also read our reviews and customer feedback. It will help you to figure out that whether our braindumps are useful for you. 100% Guarantee Our Guarantee We know that our work is not easy, and we always try to put our best efforts to ensure that you get the best Juniper JN0-250 exam preparation material as well as test questions. Failed candidates can get a full refund, of the payment of exam dumps. We are aware of the fact that how much difficult it is to pass the Juniper JN0-250 exam on the first attempt and this is why we provide you with a 100% Money-Back Guarantee.
NEW QUESTION 13
Which statement is correct about the default configuration of a Mist AP?
- A. No interface configuration is provided and an IP must be statically defined after booting.
- B. 192.168.0.1 is statically configured on the uplink port.
- C. DHCP is enabled to retrieve IP information.
- D. VLAN tagging is enabled.
Answer: B
NEW QUESTION 14
You have discovered an access point that is not connected to the corporate network but it broadcasts the corporation's SSID.
In this scenario, what is this type of access point called?
- A. rogue
- B. neighbor
- C. honeypot
- D. air gap
Answer: B
NEW QUESTION 15
You have just brought online a new site of AP43s. While verifying that everything looks good, you notice that all of the access points (APs) are reporting "insufficient power." The APs are connected to an 802. 3at-capable switch.
In this scenario, what would be the cause of the error?
- A. The cable run to each AP is too long.
- B. LLDP-MED is not configured on the switch.
- C. The Ethernet cable is plugged into the wrong port on the AP.
- D. The APs' firmware must be upgraded.
Answer: D
NEW QUESTION 16
Which two 802.11 amendments operate within the 2.4 GHz band? (Choose two.)
- A. 802.11ax
- B. 802.11b
- C. 802.11ac
- D. 802.11a
Answer: B,C
NEW QUESTION 17
What is the width for a 2.4 GHz OFDM channel?
- A. 10 MHz
- B. 30 MHz
- C. 5 MHz
- D. 20 MHz
Answer: D
NEW QUESTION 18
A customer wants to physically wire their interior automated sliding doors to Mist APs to directly control location access to certain office areas.
In this scenario, which Mist AP capability allows them to accomplish this task?
- A. header pins
- B. audio sensor
- C. optical sensor
- D. IoT interface
Answer: A
NEW QUESTION 19
What happens if your Juniper Mist subscriptions expire?
- A. Access to the Ul will be shut off.
- B. Devices will be randomly turned off and on.
- C. Devices remain operational but cannot make any further configuration changes.
- D. Devices are bricked.
Answer: C
NEW QUESTION 20
What is the base subscription required to get started with a Mist access point?
- A. Wi-Fi Management and Assurance
- B. Mist Edge
- C. Premium Analytics
- D. Virtual Network Assistant
Answer: A
NEW QUESTION 21
In a standard roam from one access point to another access point, what makes the decision to roam?
- A. the client device
- B. the controller
- C. the cloud
- D. the access point
Answer: A
NEW QUESTION 22
What are three valid administrator roles that you would be able to assign to a user within an organization? (Choose three.)
- A. Root User
- B. View
- C. Super User
- D. Network Admin
- E. Helpdesk
Answer: A,B,C
NEW QUESTION 23
How should you design a WLAN to ensure optimal performance?
- A. Place one access point in every room and allow RRM to tune the power and channel settings.
- B. Place an access point every 8-15 meters in all areas requiring coverage.
- C. Initially install 4-8 access points, then use the Mist capacity SLE to determine the remaining access point placements.
- D. Use RF modelling software to design a WLAN to satisfy customer requirements.
Answer: D
NEW QUESTION 24
Which characteristic describes Mist's cloud software architecture?
- A. shard based
- B. controller based
- C. microservices based
- D. monolithic code
Answer: C
NEW QUESTION 25
Which SLE would you use to determine Wi-Fi interference?
- A. Successful Connects
- B. AP Uptime
- C. Roaming
- D. Capacity
Answer: D
NEW QUESTION 26
Which Mist subscription is required for location tracking of Bluetooth badges?
- A. Asset Visibility
- B. Wi-Fi Assurance
- C. Virtual Network Assistant
- D. User Engagement
Answer: A
NEW QUESTION 27
Which statement is correct about channel bonding?
- A. Channel bonding combines two or more adjacent channels to increase throughput.
- B. A maximum of two channels can be bonded in the 5 GHz frequency.
- C. Channel bonding increases the total number of 20 MHz channels available in the 5 GHz frequency.
- D. Channel bonding combines two frequency bands together to increase operational efficiency.
Answer: A
NEW QUESTION 28
Under ideal conditions, which frequency band will have the farthest usable range?
- A. 2.4 GHz
- B. 6 GHz
- C. 900 MHz
- D. 5 GHz
Answer: A
NEW QUESTION 29
......
JN0-250 are Available for Instant Access: https://pass4sure.examtorrent.com/JN0-250-prep4sure-dumps.html
