
HCIA-Access V2.5 Practice Tests 2026 | Pass H35-210_V2.5 with confidence!
Practice Huawei Certified ICT Associate H35-210_V2.5 exam. Online Exam Practice Tests with detailed explanations!
NEW QUESTION # 247
Which of the following VLAN types is not supported by the MA5600T/MA5680T?
- A. Smart VLAN
- B. Standard VLAN
- C. Sub VLAN
- D. MUX VLAN
Answer: A
NEW QUESTION # 248
What remote acceptance functions can MA5600T/MA5680T provide?
- A. Voice call simulation test
- B. PPPOE simulation test
- C. BTV simulation test
- D. DHCP simulation test
Answer: A,B,C,D
NEW QUESTION # 249
command... What is the correct description of the three points in ./.profile?
- A. The third point. Connected to the previous /, which means the root directory
- B. The third point. Before profile, the entire .profile is a file name, which means a hidden file
- C. The first point. Means execution, same as sh
- D. The second point. Connected to the back /, ./ indicates the current directory
Answer: B,C,D
NEW QUESTION # 250
What is the smallest constituent unit in the message constituent mechanism of the H248 protocol?
- A. command
- B. message
- C. transaction
- D. Associated context
Answer: A
NEW QUESTION # 251
Which of the following statements about 802.1Q is incorrect?
- A. The value of TPID in the 802.1Q Ethernet frame structure is 8100
- B. Theoretically, the value range of VLAN ID is 0~4095
- C. 802.1Q Ethernet frame is 4 bytes more than ordinary Ethernet frame
- D. There are only 4 VLAN priorities in the 802.1Q Ethernet frame structure
Answer: D
NEW QUESTION # 252
Which command is used to delete a single board in the UA5000 chassis?
- A. Board erase
- B. Board delete
- C. Undo board
- D. No board
Answer: B
NEW QUESTION # 253
Which of the following statements about MIB is incorrect?
- A. The OID in a MIB is usually identified by a group of letters.
- B. MIB is short for management information library.
- C. The MIB information of a device can be read using the MIB BROWSER tool.
- D. MIB is an important part of the SNMP network management model.
Answer: A
Explanation:
OIDs (Object Identifiers) are numeric (e.g., 1.3.6.1.2.1.1.5), not letters. The statement in C is incorrect.
NEW QUESTION # 254
The OLT supports multiple protection switching modes for GPON lines. The ( ) technology is supported by the OLT to protect the backbone and branch optical fibers at the same time.
- A. Type D
- B. Type C
- C. Type B
- D. Type A
Answer: B
Explanation:
GPON networks use various protection mechanisms to ensure high availability and reliability.
These mechanisms are classified into different types based on their scope and functionality:
Type A:
Protects only the trunk fiber (between the OLT and the splitter). Does not protect branch fibers (between the splitter and ONUs).
Type B:
Protects the trunk fiber but does not provide simultaneous protection for branch fibers.
Type C:
Provides full protection for both the trunk and branch fibers. Uses redundant fibers and splitters to ensure continuity in case of a failure.
Type D:
Not a standard GPON protection type.
Since the question specifies protection for both the backbone (trunk) and branch fibers, the correct answer is Type C.
NEW QUESTION # 255
Is the following description correct? MA5600T/MA5680T SVLAN + CVLAN forwarding usually refers to forwarding packets through SVLAN + CVLAN on the service board, and forwarding packets through VLAN+MAC on the main control board; strict SVLAN + CVLAN forwarding means that both the service board and the main control board are forwarded through SVLAN + CVLAN forwards packets.
- A. True
- B. False
Answer: A
NEW QUESTION # 256
Which of the following statements about static routes is correct?
- A. Static routes are learned from another routing protocol and imported to a local routing table.
- B. Static routes are manually added to a routing table but are not dynamically updated by a routing protocol.
- C. When the network topology changes, static routes need to be recalculated.
- D. Static routes have been set before a router is delivered to the market.
Answer: B
Explanation:
Static routes are manually configured by network administrators and are not dynamically updated by routing protocols. Let us analyze each option:
* Option A :
* Correct : Static routes are manually added to the routing table by the administrator. They remain unchanged unless manually modified or removed.
* Option B :
* Incorrect : Static routes are not automatically recalculated when the network topology changes.
If a static route becomes invalid due to a topology change, the administrator must manually update it.
* Option C :
* Incorrect : Static routes are not learned from other routing protocols. Routes learned from dynamic protocols (e.g., OSPF, RIP) are dynamic routes, not static routes.
* Option D :
* Incorrect : Static routes are not preconfigured on routers before delivery. They are configured by administrators based on the network design.
Thus, the correct answer is A .
References:
* HCIA Huawei ACCESS Official Documentation , Chapter: Static Routing.
* Routing Protocols and Static Routes by Huawei.
NEW QUESTION # 257
After the hardware installation is completed, what checks are required?
- A. The power cord is connected correctly and the cabinet should be grounded
- B. There is no debris in the cabinet, and the screws should be tightened. The parts in the cabinet must not rust. Dust filter installed
- C. The cabinet door, side baffle plate and the main body are connected with ground wire, and the cabinet door opens and closes smoothly.
- D. The appearance of the cabinet is clean, without deformation, paint peeling and rust
Answer: A,B,C,D
NEW QUESTION # 258
Which of the following protocols works at the transport layer and is connectionless-oriented?
- A. IP
- B. ARP
- C. TCP
- D. UDP
Answer: D
Explanation:
The transport layer in the OSI model is responsible for end-to-end communication and includes two main protocols: TCP (Transmission Control Protocol) and UDP (User Datagram Protocol) .
* IP (Internet Protocol) : Works at the network layer and is responsible for routing packets across networks.
* ARP (Address Resolution Protocol) : Works at the network layer and maps IP addresses to MAC addresses.
* TCP : A connection-oriented protocol at the transport layer that ensures reliable communication through acknowledgments and retransmissions.
* UDP : A connectionless-oriented protocol at the transport layer that provides faster but less reliable communication compared to TCP.
Since the question specifies a connectionless-oriented protocol at the transport layer, the correct answer is UDP .
References:
* HCIA Huawei ACCESS Official Documentation , Chapter: Transport Layer Protocols.
* TCP/IP Protocol Suite Overview by Huawei.
NEW QUESTION # 259
The OLT supports multiple traffic classification technologies. Currently, the traffic classification technologies supported include:
- A. User-side service encapsulation
- B. VLAN + user-side service encapsulation
- C. VLAN + user-side packet priority
- D. User-side VLAN
Answer: C
Explanation:
* Traffic Classification Overview :
* Traffic classification is used to identify and prioritize different types of traffic on the network.
* The OLT (Optical Line Terminal) supports various methods for classifying traffic based on VLAN tags, packet priorities, and service encapsulation.
* Supported Technologies :
* User-side VLAN : Classifies traffic based solely on VLAN tags. This is a basic method but does not consider packet priority or service type.
* VLAN + user-side packet priority : Combines VLAN tags with packet priority (e.g., DSCP or
802.1p values) for more granular classification.
* VLAN + user-side service encapsulation : Combines VLAN tags with service-specific encapsulation, but this is less commonly used.
* User-side service encapsulation : Focuses only on service encapsulation without considering VLAN tags or packet priority.
* Why B?
* The combination of VLAN tags and user-side packet priority provides the most effective and widely supported traffic classification method. It allows the OLT to classify traffic based on both VLAN membership and priority levels, ensuring efficient QoS (Quality of Service) management.
Thus, the correct answer is B .
References:
* HCIA Huawei ACCESS Official Documentation , Chapter: Traffic Classification.
* GPON Traffic Management by Huawei.
NEW QUESTION # 260
Which of the following are correct for GPON product business specifications?
- A. SCUL supports optical and copper integrated access
- B. HG8245 supports 256 tconts
- C. The fiber length of the PON port must be within 20KM
- D. MA5680T each board can provide 4-8 GPON ports, which can support 1:64 split ratio
Answer: A,D
NEW QUESTION # 261
During normal operation and maintenance, you can run the display ont info command to query the "Run state" of the ONT. Which of the following states shows that the ONT is online?
- A. online
- B. to match
- C. offline
- D. active
Answer: A
NEW QUESTION # 262
During the configuration of the EPON PPPoE service, what templates need to be configured to increase the MDU?
- A. Route template
- B. System parameter template
- C. Traffic template
- D. DBA template
Answer: A,D
NEW QUESTION # 263
Which bit in the Flags field of an IP packet indicates whether the packet can be fragmented?
- A. MF
- B. Reserved bit 0
- C. DF
- D. ToS
Answer: C
NEW QUESTION # 264
The customer needs to access the following information points: AP, PC, IP camera, and IPTV.
The AP is powered by the ONU. The types of ONU interfaces include:
- A. GE, GE (PoE), RF
- B. GE, GE (PoE)
- C. GE, GE (PoE), Wi-Fi
- D. GE, GE (PoE), POTS
Answer: C
Explanation:
GE (PoE): Powers the AP.
GE: Connects to PC, IP camera, and IPTV.
NEW QUESTION # 265
MA5600 system comes with 4 default ADSL line templates, which of the following templates are provided when the system leaves the factory?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A,C,D
NEW QUESTION # 266
In data communication, what are the modes of data transmission on the wire? (Multiple choice)
- A. Simplex
- B. Half duplex
- C. Full duplex
- D. Autonegotiation
Answer: A,B,C
NEW QUESTION # 267
If the contaminated fiber contacts the normal fiber end face, it will contaminate the normal fiber end face, resulting in abnormal attenuation, reflection and other problems, affecting the quality of the fiber link. Therefore, before and after measuring the optical power, the optical fiber interface needs to be cleaned.
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 268
In the ODN network, which of the following protection methods can only protect the backbone fiber? (Multiple choice)
- A. TypeB dual-homing protection
- B. Typec single-homing protection
- C. TypeB single-homing protection
- D. TypeC dual-homing protection
Answer: B,D
NEW QUESTION # 269
......
The best H35-210_V2.5 exam study material and preparation tool is here: https://pass4sure.examtorrent.com/H35-210_V2.5-prep4sure-dumps.html
