[Q42-Q63] Master 2025 Latest The Questions CCNP Enterprise and Pass 300-430 Real Exam!

Share

Master 2025 Latest The Questions CCNP Enterprise and Pass 300-430 Real Exam!

Penetration testers simulate 300-430 exam PDF


Cisco 300-430 exam covers a range of topics related to wireless network implementation, including wireless site surveys, WLAN deployment and configuration, troubleshooting, and security. Candidates who pass 300-430 exam demonstrate their ability to design, deploy, and manage enterprise wireless networks using Cisco technologies and methodologies.

 

NEW QUESTION # 42
An IT administrator deployed an OEAP to the home of a remote user, but the OEAP cannot reach the WLC. Which two configuration settings must be completed before an OEAP is deployed successfully? (Choose two.)

  • A. Configure the AP mode to FlexConnect and check the box for Office Extend AP.
  • B. Configure Primary Controller Name and Management IP address in the High Availability tab.
  • C. Configure Secondary Controller Name and Management IP address in the High Availability tab.
  • D. Configure the WLC with an external IP address on the virtual interface.
  • E. Configure LSC to authorize the OEAP.

Answer: A,B


NEW QUESTION # 43
A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber. QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?

  • A. Configure the WLAN to broadcast on 5 GHz radios only and allow Jabber users to conned.
  • B. Configure QoS on the mobile devices that have Jabber installed.
  • C. Enable Cisco Centralized Key Management on the WLAN so that the Jabber-enabled devices will connect.
  • D. Configure an AVC profile for the Jabber traffic and apply it to the WLAN.

Answer: D

Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/81/Jabber_in_WLAN/b_Jabber_in_WLAN.html#reference_7B4539C91FBE4639ACF906F6F3931667


NEW QUESTION # 44
Which two protocols are used to communicate between the Cisco MSE and the Cisco Prime Infrastructure network management software? (Choose two.)

  • A. Telnet
  • B. SOAP
  • C. SSH
  • D. HTTPS
  • E. NMSP

Answer: D,E

Explanation:
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/33/user/guide/bk_CiscoPrimeInfrastructure_3_3_0_UserGuide/bk_CiscoPrimeInfrastructure_3_3_0_UserGuide_chapter_0100110.html


NEW QUESTION # 45
An enterprise has two WLANs configured on WLC. It is reported that when converting APs to FlexConnect mode. WLAN A works but WLAN B does not. When converting APs to local mode. WLAN B works, but WLAN A does not. Which action is needed to complete this configuration?

  • A. Disable local switching on the WLANs.
  • B. Create a Cisco FlexConnect group with WLAN-VLAN mapping.
  • C. Join the APs to a Cisco FlexConnect group.
  • D. Map the AP group to the WLAN interface.

Answer: B


NEW QUESTION # 46
A customer has implemented several WLANs in an auditorium utilizing a newly dedicated WLC and is experiencing excessive channel utilization regardless of occupancy. Which action reduces channel utilization without removing SSIDs?

  • A. Disable MCS data rates used by 40 MHz channels.
  • B. Disable data rates that use CCK.
  • C. Disable VHT data rates.
  • D. Disable MCS data rates 0 through 11.

Answer: B

Explanation:
References: http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site- survey-guidelines-wlan-00.html


NEW QUESTION # 47
Which two statements about the requirements for a Cisco Hyperlocation deployment are true?
(Choose two.)

  • A. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.
  • B. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments.
  • C. After enabling Cisco Hyperlocation on Cisco CMX, the APs and the wireless LAN controller must be restarted.
  • D. NTP can be configured, but that is not recommended.
  • E. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX.

Answer: B,E

Explanation:
https://www.cisco.com/c/en/us/products/collateral/wireless/mobility-services-engine/datasheet- c78-734648.html


NEW QUESTION # 48
A company is collecting the requirements for an on-premises event. During the event, a wireless client connected to a dedicated WLAN will run a video application that will need on average
391595179 bits per second to function properly. What is the QoS marking that needs to be applied to that WLAN?

  • A. Gold
  • B. Bronze
  • C. Platinum
  • D. Silver

Answer: A


NEW QUESTION # 49
The CTO of an organization wants to ensure that all Android devices are placed into a separate VLAN on their wireless network. However, the CTO does not want to deploy ISE. Which feature must be implemented on the Cisco WLC?

  • A. RADIUS server overwrite interface
  • B. AAA override
  • C. WLAN local policy
  • D. custom AVC profile

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html


NEW QUESTION # 50
A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs. Which feature connects the issue?

  • A. multicast AP multicast mode
  • B. unicast AP multicast mode
  • C. broadcast forwarding
  • D. controller IGMP snooping

Answer: A

Explanation:
Note: The question is about the reason behind CPU hike, it is not asking the solution for the issue
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81671-multicast-wlc-lap.html


NEW QUESTION # 51
When implementing self-registration for guest/BYOD devices, what happens when an employee tries to connect four devices to the network at the same time?

  • A. All devices are allowed on the network simultaneously.
  • B. The last device is removed and the newly added device is updated as active device.
  • C. Purge time dictates how long a device is registered to the portal.
  • D. The registration is allowed, but only one device is connected at any given time.

Answer: A

Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_Design_Guide/BYOD_Enhanced_Use_Case.html


NEW QUESTION # 52
What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarms page?

  • A. 24 hours
  • B. 7 days
  • C. 3 hours
  • D. 3 days

Answer: B

Explanation:
Explanation

(7 Days is the max, you can select


NEW QUESTION # 53
Which three properties are used for client profiling of wireless clients? (Choose three.)

  • A. DHCP
  • B. hostname
  • C. IP address
  • D. OS version
  • E. MAC OUI
  • F. HTTP user agent

Answer: A,E,F

Explanation:
The user can configure these policies and enforce end-points with specified policies. The wireless clients will be profiled based on MAC OUI, DHCP, HTTP user agent (valid Internet is required for successful HTTP profiling). The WLC uses these attributes and predefined classification profiles to identify devices.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html


NEW QUESTION # 54
An engineer must achieve the highest level of location accuracy possible for a new mobile application. Which technology must be implemented for this use case?

  • A. ToA lateration
  • B. Bluetooth Low Energy
  • C. RSS lateration
  • D. Time Difference of Arrival

Answer: D

Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/WiFiLBSDG/wifich2.html


NEW QUESTION # 55
A healthcare organization notices many rogue APs and is concerned about a honeypot attack. Which configuration must a wireless network engineer perform in Cisco Prime Infrastructure to prevent these attacks most efficiently upon detection?

  • A. Set the auto containment level to 0 and select the Ad Hoc Rogue AP containment option.
  • B. Set the auto containment level to 4 and select the Using Our SSID containment option.
  • C. Set the auto containment level to 0 and select the Using Our SSID containment option
  • D. Set the manual containment level to 4 and select the Ad Hoc Rogue AP containment option.

Answer: D


NEW QUESTION # 56
Branch wireless users report that they can no longer access services from head office but can access services locally at the site. New wireless users can associate to the wireless while the WAN is down. Which three elements (Cisco FlexConnect state, operation mode, and authentication method) are seen in this scenario? (Choose three.)

  • A. authentication-central/switch-central
  • B. WEB authentication
  • C. authentication-local/switch-local
  • D. lightweight mode
  • E. standalone mode
  • F. WPA2 personal

Answer: C,E,F

Explanation:


NEW QUESTION # 57
A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC. Which configuration should be used to accomplish this goal?

  • A. FlexConned mode with central switching enabled
  • B. FlexConnect mode with OfficeExtend enabled
  • C. FlexConnect mode with local authentication
  • D. FlexConnect mode with central authentication

Answer: C

Explanation:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/72/configuration/guide/cg/cg_flexconnect.html#wp1241304


NEW QUESTION # 58
A network engineer is implementing BYOD on a wireless network. Based on the customer requirements, a dual SSID approach must be taken. Which two advanced WLAN configurations must be performed? (Choose two.)

  • A. Select DHCP Profiling.
  • B. Set NAC State to Radius NAC.
  • C. Select Enable Session Timeout.
  • D. Set DHCP Addr. Assignment to Required.
  • E. Set Allow AAA Override to Enabled.

Answer: A,B


NEW QUESTION # 59
The security learn is concerned about the access to all network devices, including the Cisco WLC. To permit only the admin subnet to have access to management, a CPU ACL is created and applied. However, guest users cannot get to the web portal. What must be configured to permit only admins to have access?

  • A. Management traffic from the guest network must be configured on the ACL rules.
  • B. Access to Cisco ISE must be allowed on the pre authentication ACL.
  • C. The guest portal must be configured on the CPU ACLs on the Cisco WLC.
  • D. Traffic toward the virtual interface must be permitted.

Answer: B

Explanation:


NEW QUESTION # 60
An engineer must configure MSE to provide guests access using social media authentication. Which service does the engineer configure so that guests use Facebook credentials to authenticate'?

  • A. Guest Connect
  • B. Client Connect
  • C. Visitor Connect
  • D. Social Connect

Answer: D


NEW QUESTION # 61
The CTO of an organization wants to ensure that all Android devices are placed into a separate VLAN on their wireless network. However, the CTO does not want to deploy ISE. Which feature must be implemented on the Cisco WLC?

  • A. RADIUS server overwrite interface
  • B. AAA override
  • C. WLAN local policy
  • D. custom AVC profile

Answer: C

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html


NEW QUESTION # 62
A wireless network has been implemented to enable multicast video to be streamed reliably over the wireless link to the wireless to the wireless users. After a client reports that the video is unable to stream the administrator determines that the client is connecting a data rate of 12 Mbps and is trying to stream to a void multicast address on the network. Which two actions must be applied?
(Choose two.)

  • A. Turn off IGMP snooping for all the configured WLANS on the controller.
  • B. Change the WLAN QoS value to Bronze for the WLANs on the controller.
  • C. Allow RTSP stream the video due to wireless multicast not using acknowledgments.
  • D. Allow multicast direct to work correctly and multicast-direct to be enabled globally.
  • E. Implement video stream for the multicast video on the controller

Answer: D,E


NEW QUESTION # 63
......

Penetration testers simulate 300-430 exam: https://pass4sure.examtorrent.com/300-430-prep4sure-dumps.html